Scubapro Smart+ Pro Transmitter

Enjoy the convenience of air integration without the hassle of a dangling hose. The Scubapro Smart+ Pro Transmitter is compatible with Scubapro’s HUD, G2 & A2 dive computers (see SKU’s: SCPHT, UTCG2, UTCG2C, SCPA2). This low-profile transmitter works with Scubapro’s most advanced dive computers. It screws into a 7/16″ threaded high-pressure port on your first stage and relays tank pressure, true remaining bottom time (RBT) and advanced settings in your dive computer to the computer screen. More compact size improves first stage mounting options. Low profile design features a more visible built-in LED on top of the cap that provides an estimate of tank pressure. Coded transmission technology prevents interference between multiple dive computers. Easy to use, you only need to pair it once!

More compact size compared to Scubapro’s current transmitter (see SKU: UTCTL) features a smaller body diameter. More visible visual cues. Slow Short Blinking Green Light: 1,450 psi (100 bars) and over. Short Double Blinking Yellow Light: Between 1,450 psi (100 bars) and 725 psi (50 bar). Long Single Blink Red Light: Below 725 psi (50 bars). New communication technology improves reliability. The transmitter’s maximum operating depth is 984″ (300m) with a maximum operating pressure of 4350 psi (300 bars and is powered by a user replaceable CR2 type battery. The transmitter provides approximately a battery life expectancy of 300 hours in operating mode or 2-year in sleep mode. Units’ operational temperature is 14-degrees F to 122-degress F (-10-degrees C to +50-degrees C) with a storage temperature range of -4-degrees F to 140-degrees F (-20-degree C to +60-degrees C). Transmission range is approximately 5′ (1.5m). The Scubapro Smart+ Pro Transmitter comes with an owner’s manual.

From the ManufacturerEnjoy the convenience of air integration without the hassle of a dangling hose. The low-profile transmitter screws into a high pressure port on your first stage and relays tank pressure and true remaining bottom time (RBT) to the computer screen. Featuring a more visible built-in LED on top of the cap, it provides an estimate of tank pressure when the first stage is attached to a tank letting you know if the tank has gas without needing to activate the computer.

Scubapro Smart+ Pro Transmitter Features

• Convenience of Air Integration w/o Hassle of Dangling Hose
• Low-Profile Smart Transmitter
• Works w/Scubapro’s Most Advanced Dive Computers
• Compatibility:Scubapro’s HUD, G2 & A2 Dive ComputersSee SKU’s: SCPHT, UTCG2, UTCG2C, SCPA2
• Screws into 7/16″ Threaded High-Pressure Port On-First-Stage
• Relays Tank Pressure & True Remaining Bottom Time (RBT) to Computer
• Built-In LED: Gives Estimate of Pressure
• Let’s You Know if Tank Has Gas w/o Needing to Activate Computer
• Maximum Operating Depth: 4350 psi (300 bars)
• LED Indicator Status:1,450 psi (100 bars) & Over: Slow Short Blinking Green LightBetween 1,450 psi (100 bars) & 725 psi (50 bars): Slow Short Double Blinking Yellow LightBelow 725 psi (50 bars): Long Single Blinking Red Light
• Maximum Operating Pressure: 4350 psi (300 bars)
• Easy to Use, Only Need to Pair Once w/Computer
• Coded Transmission Technology Prevents Interference of Different Computers
• Imperial or Metric Measurements
• Power: CR2 Lithium User-Replaceable Battery
• Battery Life Expectancy:Sleep Mode: Two YearsOperating Mode: 300 Hours
• Owner’s Manual